|
Home
Products
Contact & Feedback
How to Choose
Future Products
Request Form
Manufactures PDF Brochures
Dealer Query
PayPal Member Information
Testimonials
Price List & Order Form
Installation Instructions
Repair Services
Returns
Warranty
PP-Power Seller
Sponsors
Links
Privacy Policy
Terms & Conditions
E-BAY
Purple Power Seller
| | Generic BIDET SEAT INSTRUCTION GUIDE. Follow the directions supplied by the manufacturer your new bidet seat. Required and not supplied with each seat: - 2 Crescent or open end wrenches
- Tools to remove old toilet seat
- Teflon tape or pipe sealant
- Flexible water line going to the toilet.
Everything else is supplied to install the seats. - Shut of the water to the toilet.
- If the water line to the toilet is rigid, it should be replaced with a flexible water line available at hardware stores.
- Install the supplied Branching ' T ' connector. Teflon tape or thread sealant can be used.
Picture #2: - Remove the old seat and install the new one.
Picture #3: - Install the incoming water line to the ' T ' connector and also the water line to the bidet.
- Plug in the seat to the available power source.
Picture #4: - If the unit has a remote control it can then be mounted.
| | | | | Installation Instructions | | | | | | Step 1: Insert the rubber washer into the bidet spray head. Then screw the
 hose to the head. | | | | Step 2: Use the sealer tape to cover all screw threading to prevent leakage. | | | | Step 3: Close the stop valve. Using pliers unscrew and discard the existing supply line. | | | | Step 4: Flush the toilet tank several times until the tank is empty. Connect the new supply line to the stop valve and fill valve. | | | | Step 5: Open the stop valve make sure there are no water leaks. | | | | Step 6:
Unit easily mounts to the wall for your convenience. | |  |
|  |
|
Providing
Bidet products, Factory Authorized Service & Parts since 1990
click
on icon to contact webmaster